Sale ends soon!
(C1C) – COR-TEN EVEREDGE-5′ (5 SECTIONS). For Gardens, Parks, Malls, Showplaces and well tended Gardens.EverEdge is all-in-one. There are no separate stakes or parts to come loose. Each 39′ section locks permanently into the next. Sharp angles, tight curves or circles can be pre-formed by bending over a wooden edge. Once you’ve made a neat edge (for the last time), place a block of wood on top of EverEdge and hammer into the ground to 1/2′ below your cut grass level. Link EverEdge by locking onto the previous piece.Each pack contains 5 – 1 meter (39′) sections of 4′ high (7′ overall inc. spikes) – (approximately 1mm thick) EverEdge. Total length is approximately 16.25 ftTo determine number of packs needed for a specific project:1 pack = 5 metres or about 16.5 feetLess overlap of about 6% = 4.7 metres or about 15.42 feet**Do qty feet needed x 15.42 to get box count** Actually take # of feet x .30480 to determine # of meters (450 x .30480 = 137.16. Rounded up this becomes 137.2)Using 450 feet as example:450 feet = 137.2 metres (137.2 / 4.7 = 29.18) so in this case 30 packs would be required. (1 foot equals .3048 meters)Customers can be advised that one pack will edge about 15 1/2 fet of lawn, path, etc.EverEdge Cor-Ten steel edging is a product that is designed to weather naturally. The way it works is that a thin layer of rust forms a protective layer over the edging strip. This protective layer doesn’t break down like normal steel and the edging will last for many years.Cor-Ten has really come to the fore as a material to be used in gardens in the last few years. This has been driven by garden designers and architects who have been using it in their gardens at the worlds most prestigious gardening events like the RHS Chelsea Flower Show.When used as an edge to flower beds and lawns, EverEdge Cor-Ten edging gives a natural and rustic finish which works especially well in traditional cottage gardens but is equally at home in more formal settings. (C1C) – COR-TEN EVEREDGE-5′ (5 SECTIONS)