Sale ends soon!
ECO-WORTHY USA Stock Heavy Duty Nut & Seeds Hand Operated Oil Screw Press Stainless Steel Expeller Model: L10ZYJ-1. Tips 1. The new machine is easy to run after several relatively using. 2. Press process such as resistance, can be reversed laps (normally clockwise) 3. Squeeze oil needs go through 5-8 hours precipitation Assembly: Before operation please fix the frame and make sure crank can be turned freely. Lubricate washer with edible oil and insert on screw shaft from the small end. Insert screw shaft in press cage. Screw on press cage cap and screw on terminal adjustment bolt. Attach crank arm to screw shaft and tighten the bolt. Fill 80% fuel to the lamp bottle (kerosene or alcohol).pass a 15 cm wick through the washer. Place the lamp under press cage. Secure the lamp with rubber band. Heating: To guarantee the oil output, the press cage should be heated for about 10 minutes. When the press cage temperature reaches 50-70Ã¢’ÆÃ¯Â¼Å material can be put into inlet for pressing. The lamp remains heating during pressing as well. Operation: Make sure no impurities in the material before pressing. At the beginning of pressing, oil flowing the terminal adjustment bolt is normal. Loose the terminal adjustment bolt if the discharged cake is too dry and crank turning resistance is too big. Tighten the terminal adjustment bolt if the discharged cake contains too much oil residual. Cleaning: Clean the oil press immediately after operation. Otherwise residua in the machine will get hard and affect next operation. Thoroughly clean the machine before first oil pressing, although food grade rust-proofing agent is used. Safety and warnings: Material friction and lamp heating cause very hot press cage, press cage cap and terminal adjust bolt. Keep hands clear of the hot parts. And if you indeed need operate the parts please take reasonable protection steps. Package Include: One oil press. ECO-WORTHY USA Stock Heavy Duty Nut & Seeds Hand Operated Oil Screw Press Stainless Steel Expeller Model: L10ZYJ-1